Description:
Super seal Fiberated (SK-60 ) is a highly fiberated bitumen emulsion for waterproofing SK-60 fiberated is designed to provide a continuous bituminous him for sealing and protection most surfaces, when cured this product permits water vapor to escape through coating while remaining resistant to water penetration.
Application
• Waterproofing water tanks and piping.
• Pavement repair and crack sealing and filling.
• Bonding needs in almost any area
- the UV resistance allow this product to be used a final
coating in smooth built-up and modified bitumen membrane system. - Above and below ground concrete protection
- Moisture barrier and bonding material
- Used as a protective coating for SPS and APP products
metal, and wood root
Advantages:
Simple easy application
• Non flammable. Non-toxic, Non-corrosive
• Resist almost all water borne chemical and contaminants - Low VOC harmless to the environment
• Breathable allows water vapor to escape
• Excellent adhesive to most clean surfaces
• Dry to tough film
• High coverage rate
• Single container, water primer
• Mineral – fiber reinforced
Application Instruction:
• Clean the surface good remove all dust, scale, oil etc. before application
• Moisten (dampen the surface with water before SK-60hberated coat
• Apply with brush, roller, spry, etc… may be diluted with clean water for workable consistency
• Apply second coat full strength after prime coat
Specification and physical feature:
• Wet-chocolate brown dry – Black
• Safely non-flammable, non toxic, non-odorous
• Viscosity Brookfield spindle four@20rpm 60to 100 p
• Adhesion: bonds to clean asphalt, wood, metal
• Percent non-volatile dry extra ) at 100 OC 62%
• Blend ability mixes easily cement gravel, etc
• Consistency homogenous creamy gel
• Dampen material with water the add SK-60 Fiberated
• Specific gravity 1
• Stability, not affected by long-time storage or transport
•Storage Limits subject to freezing-store above 50 C
- Drying time : prime coat, 30 minutes. Seal Coat two hours
• Durability resistant to high and low temperature 30 oC (-22 OF) to 80 oC ( 176 of)
Estimating : 20 & 200 Liter drum
Coverage : 1,5 to 2 m2 / Liter
Health and Safety : SK-60 Fiberated contain bitumen matenal so wear protective clothes &eye/tace protection gloves should
accidental skin or eyes contact must use clean water and seek medical advice and take the packing with you to clinic.
Sk-60 Fiberated comply with ASTMD3747 – ASTMD1187 (type 1) – ASTMD 1227 type II).